Leak repair clamps

It is very necessary to apply a proper leak sealing clamp when doing the online leak sealing job.The leak sealing clamp is a pressure vessel that installed at the leaking position to perform a sealed cavity and provides strength and rigidity.Sealed cavity is to contain the sealant that injected by a high pressure injection gun,and then form the required seal specific pressure to seal the leakage.In a word,the clamp function is used to pack the leaking point and hold the sealing compound.Clamp size can be from 1/2" to 48",max withstand high pressure is up to 5000psi and 800 degree C.

A good clamp can help seal the leak more better.Most of clamps materials are carbon steel ASTM 1020 or stainless steel ASTM 304,our leak sealing clamps are all designed according to ASME Sec. VIII pressure vessel codes and fabricated to the highest standard.

Common clamps are pipeline leak clamp,flange clamp,elbow clamp and T-pipe clamp.Unusual clamps are cap leak clamp,valve leak clamp and reduced-pipe leak clamp,box leak clamp.

The structure of leak sealing clamp must be designed according to actual leaking situation case by case.We teach how to design and fabricate leak clamps in our online leak sealing training course.

Below are some of the clamps we had done:

pipeline repair clamp

pipeline repair clamp

pipeline repair clamp

flange clamp

flange clamp

elbow clamp

elbow clamp

elbow clamp

T-pipe clamp

pipeline repair clamps